- Filter media selection is based on application.
- Media data sheets are available through customer service if required.
- Backwashing filters shown represent common sizes and media choices.
- Other sizes and media selections are available.
Install parts (bypass valve, tube adapter kits, drain fittings) are not included with units. These must be ordered separately and are listed at the end of this section.
Backwash flow rates should be considered for drain pipe sizing and should typically be 3/4” OD or larger.
Units up to 2 cubic feet (12” x 52” media tank) are shipped with media loaded. Larger systems have media packaged separately which must be loaded on site.
Carbon Filters
- Chlorine reduction
- Taste and odor reduction
- Reduction of chemical by-products of chlorination, pesticides, herbicides and other organic chemicals
- 3 cycle operation – Backwash, Fast rinse, Service
- 742 professional electronic time clock control
- Carbon works by chemical adsorption, and will need periodic replacement to maintain effectiveness
Valumax 263/742 Time Clock Control (Logix) – Backwashing Filters
Carbon Filters
| Part # | Description | 1+ | 3+ | 6+ | 12+ | |
| CFM-1.0-263-CARBON | 1.0CUFT;CARBON;263-742;;RT 9X48 | |||||
| CFM-1.5-263-CARBON | 1.5CUFT;CARBON;263-742 ;RT 10X54 | |||||
| CFM-2.0-263-CARBON | 2.0CUFT;CARBON;263-742 ;RT 12X52 | |||||
| CFM-3.0-263-CARBON | 3.0CUFT;CARBON;263-742 ;RT 14X65 | |||||
| CFM-4.0-263-CARBON | 4.0CUFT;CARBON;263-742 ;RT 16X65 |
Catalytic Carbon Filters
- Chloramine reduction
- Iron and Hydrogen Sulfide removal (typically requires air injection)
- 3 cycle operation – acwash, Fast rinse, Service
- 742 professional electronic time clock control
Catalytic Carbon Filters – Chloramine Reduction
| Part # | Description | 1+ | 3+ | 6+ | 12+ | |
| CFM-1.0-263-MC1240 | 1.0CUFT;CATALYTIC CARB;263-742;;RT 9X48 | |||||
| CFM-1.5-263-MC1240 | 1.5CUFT;CATALYTIC CARB;263-742 ;RT 10X54 | |||||
| CFM-2.0-263-MC1240 | 2.0CUFT;CATALYTIC CARB;263-742 ;RT 12X52 | |||||
| CFM-3.0-263-MC1240 | 3.0CUFT;CATALYTIC CARB;263-742 ;RT 14X65 | |||||
| CFM-4.0-263-MC1240 | 4.0CUFT;CATALYTIC CARB;263-742 ;RT 16X65 |
Nexsand Filters
- Turbidity reduction providing filtration down to 3-5 micron
- High service flow
- Removal of precipitated material after chemical feed (chlorine, peroxide, etc)
- Durable, long lasting media (typically 5+ years)
- 3 cycle operation – Backwash, Fast rinse, Service
- 742 professional electronic time clock control
Nexsand Filters
| Part # | Description | 1+ | 3+ | 6+ | 12+ | |
| CFM-.75-263-NEXSAND | .75CUFT; NEXSAND; 263-742; RT 8X44 | |||||
| CFM-1.0-263-NEXSAND | 1.0CUFT; NEXSAND; 263-742; RT 9X48 | |||||
| CFM-1.5-263-NEXSAN | 1.5CUFT;NEXSAND;263-742; RT10X54 | |||||
| CFM-2.0-263-NEXSAND | 2.0CUFT; NEXSAND; 263-742; RT 12X52 | |||||
| CFM-3.0-263-NEXSAND | 3.0CUFT; NEXSAND; 263-742; RT 14X65 |
Greensand Plus Filters
- Removal of Iron, Manganese, Hydrogen Sulfide, Arsenic and Radium
- Effective over a broad pH range
- Batch regeneration
- Includes 10”x16” potassium permanganate feeder tank.
- 5 cycle operation – Backwash, Chem Draw, Fast rinse, Refill, Service
- 742 professional electronic time clock control
Greensand Filters
| Part # | Description | 1+ | 3+ | 6+ | 12+ | |
| CFM-1.0-268-GRNSAND | 1.0CUFT;GRNSAND;268-742; RT 9X48 | |||||
| CFM-1.5-268-GRNSAND | 1.5CUFT;GRNSAND;268-742; RT 10X54 | |||||
| CFM-2.0-268-GRNSAND | 2.0CUFT;GRNSAND;268-742; RT 12X52 |
Birm Filters & Air Injection Parts
- Iron and Manganese removal (requires presence of dissolved oxygen in water)
- Chemical free operation
- Typically used with air injector (installed ahead of well pressure tank) and air contact tank with off gas vent.
- Not suitable for use with chlorine or other chemical feed systems.
- 3 cycle operation – Backwash, Fast rinse, Service
- 742 professional electronic time clock control
Birm Filters & Air Injection Parts [Not for sale in California]
| Part # | Description | 1+ | 3+ | 6+ | 12+ | |
| CFM-1.0-263-BIRM | 1.0CUFT;BIRM;263-742; RT948 | |||||
| CFM-1.5-263-BIRM | 1.5CUFT;BIRM;263-742 ;RT1054 | |||||
| CFM-2.0-263-BIRM | 2.0CUFT;BIRM;263-742; RT1252 |
| Part # | Description | 1+ | 2+ | 4+ | 8+ | |
| CH3929-5 | IRON REMOVER MICRONIZER | |||||
| 20289 | AIR CTRL ASSY CT-40 (FITS NEW QC TANKS ONLY) | |||||
| 31608 | CT-40 RETENTION TANK, 16X53 |