- Filter media selection is based on application.
- Media data sheets are available through customer service if required.
- Backwashing filters shown represent common sizes and media choices.
- Other sizes and media selections are available.
Install parts (bypass valve, yokes, drain fittings) are not included with units. These must be ordered separately and are listed at the end of this section.
Backwash flow rates should be considered for drain pipe sizing and should typically be 3/4” OD or larger.
Units up to 2 cubic feet (12” x 52” media tank) are shipped with media loaded. Larger systems have media packaged separately which must be loaded on site.
Air Injection Oxidizer Filters (AIO)
- Simplified Iron, Manganese, and Hydrogen Sulfide removal
- Chemical free, single tank solution
- Utilizes an air draw cycle to create a captive air pocket above the media bed to enhance oxidation and filtration
- SXT electronic time clock control
- 4 cycle operation – Backwash, Air Draw, Fast rinse, Service
- BIRM media for Iron and Manganese removal. Refer to media data sheet for application guidelines
- Catalytic Carbon media for Hydrogen Sulfide removal
5810 AIO
2510 AIO
Air Injection Oxidizer Filters (AIO)
| Part # | Description | 1+ | 3+ | 6+ | 12+ | |
| CFM-1.0-5800SXT-AIO-BIRM | 1.0 CUFT; BIRM; 5800SXT-AIO; RT 9X48 | |||||
| CFM-1.5-5800SXT-AIO-BIRM | 1.5 CUFT; BIRM; 5800SXT-AIO; RT 10X54 | |||||
| CFM-2.0-5800SXT-AIO-BIRM | 2.0 CUFT; BIRM; 5800SXT-AIO; RT 12X52 | |||||
| CFM-1.0-5800SXT-AIO-MC1240 | 1.0 CUFT; CATALYTIC CARB 5800SXT-AIO; RT 9X48 | |||||
| CFM-1.5-5800SXT-AIO-MC1240 | 1.5 CUFT; CATALYTIC CARB 5800SXT-AIO; RT 10X54 | |||||
| CFM-2.0-5800SXT-AIO-MC1240 | 2.0 CUFT; CATALYTIC CARB 5800SXT-AIO; RT 12X52 | |||||
| CFM-1.0-5800SXT-AIO-CENTAUR | 1.0 CUFT CENTAUR CARB 5800SXT-AIO; RT 9X48 | |||||
| CFM-1.5-5800SXT-AIO-CENTAUR | 1.5 CUFT CENTAUR CARB 5800SXT-AIO; RT 10X54 | |||||
| CFM-2.0-5800SXT-AIO-CENTAUR | 2.0 CUFT CENTAUR CARB 5800SXT-AIO; RT 12X52 | |||||
| CFM-1.0-2510AIO-BIRM | 1.0 CUFT; BIRM; 2510SXT-AIO; RT 9X48 | |||||
| CFM-1.5-2510AIO-BIRM | 1.5 CUFT; BIRM; 2510SXT-AIO; RT 10X54 | |||||
| CFM-2.0-2510AIO-BIRM | 2.0 CUFT; BIRM; 2510SXT-AIO; RT 12X52 | |||||
| CFM-1.0-2510AIO-MC1240 | 1.0 CUFT; CATALYTIC CARB; 2510SXT-AIO; RT 9X48 | |||||
| CFM-1.5-2510AIO-MC1240 | 1.5 CUFT; CATALYTIC CARB; 2510SXT-AIO; RT 10X54 | |||||
| CFM-2.0-2510AIO-MC1240 | 2.0 CUFT; CATALYTIC CARB; 2510SXT-AIO; RT 12X52 | |||||
| CFM-1.0-2510AIO-CENTAUR | 1.0 CUFT CENTAUR CARB 2510SXT-AIO; RT 9X48 | |||||
| CFM-1.5-2510AIO-CENTAUR | 1.5 CUFT CENTAUR CARB 2510SXT-AIO; RT 10X54 | |||||
| CFM-2.0-2510AIO-CENTAUR | 2.0 CUFT CENTAUR CARB 2510SXT-AIO; RT 12X52 |
Carbon Filters
- Chlorine reduction
- Taste and odor reduction
- Reduction of chemical by-products of chlorination, pesticides, herbicides and other organic chemicals
- 3 cycle operation – Backwash, Fast rinse, Service
- Carbon works by chemical adsorption, and will need periodic replacement to maintain effectiveness
Carbon Filters
| Part # | Description | 1+ | 3+ | 6+ | 12+ | |
| CFM-1.0-2510-CARBON | 1.0CUFT; CARBON; 2510FC; RT 9X48 | |||||
| CFM-1.5-2510-CARBON | 1.5CUFT; CARBON; 2510FC; RT10X54 | |||||
| CFM-2.0-2510-CARBON | 2.0CUFT; CARBON: 2510FC; RT12X52 | |||||
| CFM-1.0-5800SXT-CARBON | 1.0CUFT; CARBON; 5800SXT; RT 9X48 | |||||
| CFM-1.5-5800SXT-CARBON | 1.5CUFT; CARBON; 5800SXT; RT 10X54 | |||||
| CFM-2.0-5800SXT-CARBON | 2.0CUFT; CARBON; 5800SXT; RT 12X52 |
Nexsand Filters
- Turbidity reduction providing filtration dow to 3-5 micron
- High service flow
- Removal of precipitated material after chemical feed (chlorine, peroxide, etc)
- Durable, long lasting media (typically 5+ years)
- 3 cycle operation – Backwash, Fast rinse, Service
Nexsand Filters
| Part # | Description | 1+ | 3+ | 6+ | 12+ | |
| CFM-1.0-2510-NEXSAND | 1.0CUFT; NEXSAND; 2510FC; RT 9X48 | |||||
| CFM-1.5-2510-NEXSAND | 1.5CUFT; NEXSAND; 2510FC; RT10X54 | |||||
| CFM-2.0-2510-NEXSAND | 2.0CUFT; NEXSAND; 2510FC; RT 12X52 | |||||
| CFM-1.0-5800SXT-NEXSAND | 1.0CUFT; NEXSAND; 5800SXT; RT 9X48 | |||||
| CFM-1.5-5800SXT-NEXSAND | 1.5CUFT; NEXSAND; 5800SXT; RT 10X54 | |||||
| CFM-2.0-5800SXT-NEXSAND | 2.0CUFT; NEXSAND; 5800SXT ;RT12X52 | |||||
| CFM-1.0-5800XTR2-NEXSAND | 1.0CUFT;NEXSAND;5800XTR2;RT9X48 | |||||
| CFM-1.5-5800XTR2-NEXSAND | 1.5CUFT; NEXSAND; 5800XTR2; RT 10X54 | |||||
| CFM-2.0-5800XTR2-NEXSAND | 2.0CUFT; NEXSAND; 5800XTR2 ;RT12X52 |
Greensand Plus Filters
- Removal of Iron, Manganese, Hydrogen Sulfide, Arsenic and Radium
- Effective over a broad pH range
- Batch regeneration
- Includes 10”x16” potassium permanganate feeder tank.
- 5 cycle operation – Backwash, Chem Draw, Fast rinse, Refill, Service
Greensand Filters
| Part # | Description | 1+ | 3+ | 6+ | 12+ | |
| CFM-1.0-2510-GRNSAND | 1.0CUFT; GREENSAND; 2510CC; RT9X48 | |||||
| CFM-1.5-2510-GRNSAND | 1.5CUFT; GREENSAND; 2510CC; RT10X54 | |||||
| CFM-1.0-5800SXT-GRNSAND | 1.0CUFT; GRNSAND; 5800SXT; RT9X48 | |||||
| CFM-1.5-5800SXT-GRNSAND | 1.5CUFT; GRNSAND; 5800SXT RT10X54 |
Birm Filters & Air Injection Parts
- Iron and Manganese removal (requires presence of dissolved oxygen in water)
- Chemical free operation
- Typically used with air injector (installed ahead of well pressure tank) and air contact tank with off gas vent.
- Not suitable for use with chlorine or other chemical feed systems.
Birm Filters & Air Injection Parts [Not for sale in California]
| Part # | Description | 1+ | 3+ | 6+ | 12+ | |
| CFM-1.0-2510-BIRM | 1.0CUFT; BIRM; 2510FC; RT9X48 | |||||
| CFM-1.5-2510-BIRM | 1.5CUFT; BIRM; 2510FC; RT10X54 | |||||
| CFM-2.0-2510-BIRM | 2.0CUFT; BIRM; 2510FC; RT12X52 | |||||
| CFM-1.0-5800SXT-BIRM | 1.0CUFT; BIRM; 5800SXT; RT 9X48 | |||||
| CFM-1.5-5800SXT-BIRM | 1.5CUFT; BIRM; 5800SXT; RT 10X54 | |||||
| CFM-2.0-5800SXT-BIRM | 2.0CUFT; BIRM; 5800SXT; RT 12X52 |
| Part # | Description | 1+ | 2+ | 4+ | 8+ | |
| CH3929-5 | IRON REMOVER MICRONIZER | |||||
| 31608 | CT-40 RETENTION TANK, 16X53 | |||||
| 20289 | AIR CONTROL ASSY CT-40 (FITS NEW QC TANKS ONLY) |